3 Spice Pickled Beets Brine Recipes

Steps:

• Mix ingredients in a medium saucepan.
• Bring to a boil and stir until sugar is dissolved.
• Pour over cooked sliced beets in pint jars.
• Process jars per appropriate canning method. I use the water bath method and process for 30 minutes (for our elevation).

Steps:

• Place beets in a large stockpot with water to cover. Bring to a boil, and cook until tender, about 15 minutes depending on the size of the beets. If beets are large, cut them into quarters. Drain, reserving 2 cups of the beet water, cool and peel.
• Sterilize jars and lids by immersing in boiling water for at least 10 minutes. Fill each jar with beets and add several whole cloves to each jar.
• In a large saucepan, combine the sugar, beet water, vinegar, and pickling salt. Bring to a rapid boil. Pour the hot brine over the beets in the jars, and seal lids.
• Place a rack in the bottom of a large stockpot and fill halfway with water. Bring to a boil over high heat, then carefully lower the jars into the pot using a holder. Leave a 2 inch space between the jars. Pour in more boiling water if necessary until the water level is at least 1 inch above the tops of the jars. Bring the water to a full boil, cover the pot, and process for 10 minutes.

Steps:

• In a large pot, mix the white vinegar, sugar, water, cinnamon, salt, and cloves together; bring the mixture to a boil, and stir until the sugar has dissolved. Stir in the beets, and simmer until tender, 15 to 20 minutes.
• Sterilize the jars, lids, and rings in boiling water for at least 5 minutes. Using a slotted spoon, pack the sliced beets into the hot, sterilized jars, and pour in the beet liquid to fill the jars to within 1/4 inch of the top. Run a sterilized knife or a thin spatula around the insides of the jars after they have been filled to remove any air bubbles. Wipe the rims of the jars with a moist paper towel to remove any food residue. Top with lids, and screw on rings.
• Place a rack in the bottom of a large stockpot and fill halfway with water. Bring to a boil over high heat, then carefully lower the jars into the pot using a holder. Leave a 2 inch space between the jars. Pour in more boiling water if necessary until the water level is at least 1 inch above the tops of the jars. Bring the water to a full boil, cover the pot, and process for 30 minutes. Add more time if you are at high altitude.
• Remove the jars from the stockpot and place onto a cloth-covered or wood surface, several inches apart, until cool. Once cool, press the top of each lid with a finger, ensuring that the seal is tight (lid does not move up or down at all). Store in a cool, dark area.