Easy White Bread For Large 13 Pullman Pan Recipes

Steps:

• Starter: Also called pre-ferment, pâte fermentée (a mature pre-ferment, as in this starter), or poolish (which contains commercial yeast, as in this starter), this is the leavening or rising component of the bread baking process. Turn on a digital scale and weigh your empty container. Deduct the weight of the container by pressing the "tare" function, which resets the scale to zero. Add milk to the container, and tare to zero again. Then, continuing to weigh the ingredients, add salt, pinch of yeast, sugar, and flour. Use a chopstick to stir the starter until the dry and wet ingredients are just mixed. Cover with plastic wrap and let rest at room temperature, away from direct sunlight, 6-8 hours.
• Dough: Stir flour, sugar, yeast, and salt in a medium bowl, and set aside. Pour milk into the pre-ferment to loosen it. Whisk 2 eggs in a large bowl; then stir in the pre-ferment/milk mixture. Use a rubber spatula to break up the pre-ferment into the liquid. Add the flour mixture and the butter, and continue mixing until most of the dry ingredients have been combined with the starter mixture. Using a wooden spoon, and starting in the middle of the bowl, slowly stir to the edges until most of the flour has been mixed in and hydrated.
• Roll and Tuck: A technique to develop gluten in the dough so it becomes firmer and easier to work with. This is done one time, followed by a resting period. Combine 1 part fine semolina with 5 parts unbleached white flour to make dusting flour, and lightly dust a clean work surface. Using a plastic bowl scraper, push the dough and residual flour out of the bowl onto the work surface. Use the scraper to stretch and gently shape the dough into a rough rectangle (dough will still be sticky). Then, starting at one end, roll and tuck the dough like a tube, about 3-4 times. Flip the dough so it's seam-side up and flatten again to a rectangle in the opposite direction, so the seam stretches from left to right. Repeat rolling and tucking, always returning to a seam-up position. Continue until the dough feels stronger and begins to resist any further rolling, about 10 times. All of the flour will get absorbed into the dough during this process. Shape into a ball and place into a bowl coated with nonstick spray. Cover with plastic wrap and let rest at room temperature, 45 minutes.
• Stretch and Fold: This technique strengthens the dough by folding it over onto itself. This process is repeated 3 times, with a resting period after each stretch and fold. Lightly dust the work surface and your hands with dusting flour. Using the scraper, release the dough from the bowl and place it seam-side down on the work surface. Gently shape into a rectangle, then fold the dough into thirds, like a letter. Pat it down slightly, then repeat the same fold in the other direction. Place the dough back in the bowl, cover with plastic wrap and let rest at room temperature, 45 minutes. For the second stretch and fold, repeat the steps for the first stretch and fold, but this time stretch the dough by flipping back and forth (like pizza dough). Gently reshape it into a rough rectangular shape before folding. Cover with plastic wrap and rest at room temperature, 45 minutes. For the third and final stretch and fold, repeat the steps for the second stretch and fold, cover with plastic wrap and rest at room temperature, 45 minutes.
• Shaping/Fermentation (Proofing): Shape the dough to prepare it for baking, then ferment (proof) it for a period of time to expand the dough and develop flavor. Spray the bottom and sides of a pullman loaf pan with nonstick spray. Lightly dust the work surface and your hands with dusting flour. Press the dough down slightly to de-gas it, then stretch into a 16-inch square (or to whatever length of the pan you're using). Roll the square into a tube. Place the tube seam side down into the prepared pan. Gently tap the dough down with your fist to even it out in the pan, then cover with plastic wrap. Let rest at room temperature until the dough rises about 1½ -inches above the surface of the pan, 1½-3 hours.
• Baking: Preheat oven to 425 degrees F (preferably convection). Test dough for baking by gently pressing; it should bounce back, leaving a slight dimple. Make an egg wash by whisking the remaining egg with a pinch of salt; add about 1 tablespoon of milk to thin it out. Spray the outer edges of the pan with nonstick spray and use a pastry brush to gently brush egg wash across the top of the dough, twice. (The spray will ensure the egg wash doesn't seep into the corners of the pan.) Place in the oven and bake for 10 minutes. Lower temperature to 385 degrees F. Rotate the pan and bake an additional 12-15 minutes. Test for doneness by removing from oven and giving it a thump on top; it should sound hollow. Tap the pan on the counter to release the loaf; turn it over and carefully remove the bread from the pan. Return the loaf to the oven on its side, and bake directly on the rack to solidify the shape, 5 minutes.
• Cooling, Slicing, and Storing: Transfer bread to a cooling rack (and notice the caramel aroma!). Cool completely before slicing and eating, at least 2 hours. Store loosely in plastic for 7 days.

Steps:

• Select Dough setting on your bread machine.
• Put ingredients in the machine in the order suggested by your machine manufacturer. Let rise. about 90 minutes, until double in size.
• Meanwhile, generously butter your Pullman Pan and lid.
• Remove dough from machine. Handle dough with greased hands. Form into a log approximately 12-13 inches long. Place in pan, pressing the ends into corners and pan edges.
• Place lid on, leaving open about an inch so you can peek.
• Let rise until about 2/3 full, or about an inch and a half from the pan top. About 60 minutes. Near the end of the rising time, preheat your oven to 350.
• Close lid fully. Bake for 25 minutes. Remove lid. Bake for another 15-20 minutes until golden brown or desired crust color is achieved.
• Internal temp of bread should be 190 f when tested with an instant read thermometer.
• Remove from pan to rack. If desired, brush crust with butter for a softer crust. Let cool before slicing. Store in airtight bag.

Steps:

• Pour warm milk into a bowl of a stand mixer fitted with the dough hook. Sprinkle yeast on top and let dissolve until a few small bubbles begin to a form, 10 to 15 minutes. Add beaten egg, sugar, vinegar, baking soda, salt, cayenne, flour, and butter.
• Knead on low speed until dough begins to come together. Increase speed slightly and knead about 3 minutes more. Use a spatula to scrape the sides clean and gather the dough into the center. Cover and let rise until doubled in volume, 1 1/2 to 2 hours.
• Butter a spatula and a loaf pan. Scrape the dough into the pan using the spatula. Smooth out the top to distribute dough evenly. Dust the top with flour and press gently to even out the dough. Let rise in pan for 30 minutes.
• Preheat the oven to 350 degrees F (175 degrees C).
• Use a sharp knife or razor to cut a deep slash lengthwise through the center of the loaf. You may need to go over it several times. Brush the top with most of the melted butter.
• Bake in the preheated oven until golden brown, about 30 minutes.
• Brush hot loaf with remaining butter. Let cool in the pan for 10 minutes, then turn it out onto a wire rack to cool for at least 1 hour before slicing.

Steps:

• Place water, sugar, salt, oil, bread flour and yeast into pan of bread machine.
• Bake on White Bread setting. Cool on wire racks before slicing.