Serviette Napkin Folding Set Into A Wine Glass Recipes

Steps:

• Lay your serviette out flat before you in a diamond shape.
• Take the point at South and roll it neatly completely up to the North point.
• Fold the serviette in half and place it into a wine glass.
• An optional variation would be to insert a serviette/napkin ring over the folded end before putting it into the wineglass.

Steps:

• Lay your serviette square out flat before you. Fold it in half horizontally.
• Take the serviette and fold it in half again vertically so that it is now a small square a quarter the size of the original square.
• Only one corner of the square will have 4 open / loose edges, rotate your square so that it is a flat diamond shape with the open corner pointing upwards. We will call this the North corner.
• Take the East corner and make an accordion fold all the way to the West corner.
• Holding it firmly, gently pull out each of the 4 loose edges at the North point, fanning them out from left to right.
• Roll up the south corner a little to help the fan to keep its shape and place in a water or wine glass.

Steps:

• Lay your serviette square out flat before you in a diamond shape.
• Fold the South point of the diamond up to meet the North point of the diamond.
• Fold the East point up to meet the North point of the diamond and repeat with the West point.You will now have a smaller diamond shape with a vertical gap running down the center.
• Carefully turn the serviette over.The point that has the open edges should be in the South of the diamond position.
• Fold these South points up to meet the North point, you will now have a triangle shape with a horizontal gap in the center.
• Turn the napkin over again and bring the East and West points into the center, tucking them inside each other.
• Turn the serviette over again and gently fold down the two outside flaps to make the petals of the Fleur-de-lis.

Steps:

• Lay your serviette flat before you in a diamond shape.
• Take the point at North and fold it down to meet the point at South. You will now have a triangle in front of you where the crease is at the top and the point is facing the South position.
• Take this South point and fold it to the North, going past the middle centre of the top line so that you now have a strip at the bottom if the serviette and a triangle sticking out at the top of the strip.
• Turn the serviette carefully around so that it is now vertical and starting at the bottom end of the long strip, accordion pleat all the way to the other end of the strip at the top. Hold firmly so that it keeps its shape.
• Carefully set the base of the serviette into a wine or water glass (the base is the thicker bit at the bottom) and when you let go you will have a tall pleated triangle at the top and two pleated triangles hanging down at the sides.
• Arrange the pleats to that they are even and neat.

Steps:

• Lay out your square serviette in a single layer before you. Fold it in half horizontally, keeping the folded edge closest to you.
• Take the top two corners and fold them towards you coming only 1/3 of the way down the serviette, gently crease the new top edge.
• Take the bottom two corners and fold half way up but so that the upper edge doesn't quite reach the top edge that you just folded.(this makes for a cleaner and neater looking edge) you will now have a very long and thin rectangle shape.
• Keeping the side that has the join to the inside, put 1/3 of the serviette around the neck of the wine bottle, and bring the longer tail end of the serviette over the other end and tuck it carefully undernieth. tighten carefully around the neck of the bottle.

Steps:

• Take your square napkin, lay it totally flat before you, then fold it in half horizontally.
• Fold again, this time vertically so that you have before you a square a quarter the size of your origonal square.
• Only one of the 4 corners will have 4 open or loose edges. Rotate the square before you so that it looks like a diamond with the four open edges pointing to the bottom.
• We will call the points on your diamond shape East, West, North and the open egded bit, South.
• Make a horizontal fold between the East/West points, bringing the open ended South point up to meet, and on top of, the North point.You will now have a little triangle.
• Take the East point of the triangle and fold it in towards the middle. What was the sloping right hand edge of the triangle is now a vertical edge running down the center of the triangle and there is a little flap sticking out at the bottom.
• Take the West point and fold it into the center the same as you did with the previous East edge, the two vertical lines should meet in the middle, and you will have a diamond shape that has two long sides at the top and two short sides (the two little flaps) at the bottom.
• Pick up your diamond shape and fold the two little flap bits at the bottom completely under, so that they only show on the back of the triangle. The front will now look like a steep triangle with a vertical slit down the middle.
• We will call the points of this triangle East, West and North. With the flaps still folded to the back of the tiangle, fold the East and West points backwards until they meet, and gently crease the two folds that form and meet at the North point.
• The slit in the front will have opened and the 4 open points of the napkin will be hidden in layers inside. Pull very gently on them one by one and they will stand up like the sails of a boat. Some people I know call this napkin a boat, some a flower and some the Sydney Opera House.I don't know its' offical name but set onto a plate or into an empty wine glass, this a very elegant addition to a classy table setting.