Brood Brew Recipes

Steps:

• Mix the apple cider, maple syrup, pear puree, lemon juice and cinnamon together in a large cocktail shaker and dry-shake until the cinnamon is properly incorporated. Transfer the mixture to a small punch bowl with a large chunk of ice (see Cook's Note) and stir until chilled.
• For the kids: Ladle into mason jars, top with sparkling non-alcoholic cider, add a crazy straw and serve.
• For the adults: Ladle into small glasses with ice and top with hard cider.

Steps:

• For the cold brew: Combine the coffee, crushed cardamom pods, salt and water in a large pitcher and stir well to combine. Place in the refrigerator to steep for 18 to 24 hours.
• Meanwhile, for the maple oat milk: Combine the oats, water, 2 tablespoons of maple syrup, vanilla and salt in a blender. Blend on high for 20 to 30 seconds, or until smooth and creamy. Do not process for over 30 seconds as that may cause the oats to give up too much starch, which will change the texture.
• Strain the oat milk once through a fine mesh sieve and then a second time through the same sieve lined with cheesecloth or a clean kitchen towel. Allow the milk to slowly strain through the towel, gently stirring if needed. Avoid pressing or squeezing the oat milk to maintain the proper texture.
• Adjust the sweetness of the oat milk with another 1 or 2 tablespoons of maple syrup, if desired. Transfer to a jar or bottle and place in the fridge until ready to use.
• When the coffee is brewed, strain it through a fine mesh sieve to remove most of the coffee grounds. Line the sieve with a few layers of cheesecloth or a clean kitchen towel and pour the cold brew through the lined sieve one or two more times to remove any remaining grounds.
• Serve the cold brew over ice and pour over some maple oat milk to taste, leaving any oat milk sediment at the bottom of its container.

Steps:

• It is very important to sterilize all equipment that will come into contact with the beer. Also the hops, yeast, and Irish moss need to be kept refrigerated until use. Begin by sterilizing your equipment that you will use to boil the mash; the pot, metal spoon, probe of the probe thermometer, colander and strainer, including the fermenter. To sterilize everything put 2 ounces of non-scented household bleach and 3 to 4 gallons of water into the fermenter. Place other smaller items in the solution to soak. The items that are too large to fit into the fermenter can be sterilized by pouring the solution in the fermenter into and over these items and then thoroughly rinsing all equipment, including the fermenter.
• After sterilization is complete you can begin brewing beer by adding 2 gallons of spring water as well as the 1/2 pound milled grain to your pot and turn the burner on to medium high. Place the probe thermometer into the pot and set the temperature to 155 degrees, once the liquid reaches 155 degrees set a timer for 30 minutes. In the meantime soak the container of liquid malt extract in warm water; it will aid in removing it from the container. After the grain has cooked for 30 minutes add 1 gallon of water and the liquid malt extract and bring to a boil stirring so that the extract does not burn on the bottom until dissolved. The liquid will foam up to the top; when it does this, turn the heat off and let it settle then turn the heat back on and bring to a boil. Let it foam again and turn the heat off, let it settle and turn the heat back on and add the hops. Add 1-ounce of the Cascade hops and 3/4-ounce of Kent goldings hops and boil for 10 minutes. Next add 1/2 teaspoon Irish moss and boil for 5 minutes. Now add the last hops, 1-ounce Kent Goldings, cover, turn off the heat and let sit for 5 minutes. Meanwhile put the last gallon and 1 pint of water as well as the bag of ice into the fermenter and fit the top with the colander and mesh strainer. Strain the mash into the fementer and allow to cool to 80 degrees before pitching the yeast. Once the mash is cooled to 80 degrees it is now safe to add the yeast, shake the vial until the liquid is well mixed and then add to the fermenter. Cover with the lid and put airlock in place. Put into cool dark place to ferment for 7 to 10 days.
• Attach the siphon on the spigot and transfer beer from one fermenter to the second one. Add the sugar/water mixture. Bottle using the wand. Cap and place into a cool dark place for another 10 to 14 days.
• Open and enjoy.