Flaky Tart Dough Recipes

Steps:

• Add the flour and salt to a large bowl and stir to combine. Add the butter and toss to combine. With your fingers, begin to "smush" the butter into flat pieces. Continue smushing until all the butter is flattened but none of the pieces are larger than a quarter. The flour will look like coarse cornmeal.
• Add the water, quickly folding it in with a wooden spoon to distribute the moisture. (Do not stir vigorously--the dough should appear shaggy.) Use your hands to break up any large clumps of moisture. Then use your knuckles or a palm to smear the dough up the sides of the bowl (a technique known as fraisage). This distributes the butter over a larger surface to achieve larger flakes and compact the dough. Once you've gone around the bowl one time, fold the dough over itself a few times to pick up any dry bits from the bottom. Gently press the dough into a disk. (Note: The dough should remain very cool to the touch throughout the process. If it approaches room temperature, refrigerate it for 5 to 10 minutes to chill.)
• Transfer the dough to a lightly floured work surface and roll out to a 10-by-12-inch rectangle. Perform a letter fold by folding one of the short ends towards the middle and the other short end over the first, like folding a business letter.
• Turn the dough 90 degrees, so the long side faces you, and perform a second letter fold. Turn the dough 90 degrees again; perform a third letter fold.
• If the dough still feels cool, it can be used immediately. Otherwise, wrap it in plastic wrap and chill for at least 20 minutes. The dough can be refrigerated for up to 1 week or frozen for up to 1 month.

Steps:

• Whisk sugar, salt, and 1 1/3 cups flour in a medium bowl. Cut butter into 6 rectangular pieces (if using 1/2-cup sticks, cut them in half crosswise, then in half again lengthwise). Toss butter in dry ingredients to coat, then dump mixture out onto a work surface. Roll butter into flour until it is in long flexible strips, using a bench scraper to scrape butter off rolling pin or surface as needed.
• Use bench scraper to gather mixture into a loose pile, then drizzle 4 Tbsp. ice water over. Using your hands and the bench scraper, toss mixture until water is distributed, then gather into a rectangular pile. Roll out dough to a long rectangle with short ends about 8" wide, then use bench scraper to fold dough into thirds, like folding a letter. It will be very crumbly and loose; don't panic. Using bench scraper to help, turn rectangle 90° and repeat rolling and folding, gathering loose bits of dough from outer edges into the center and flouring surface as needed. Repeat rolling and folding a third time. Dough should be somewhat homogenous and creamy-looking with some dry bits around edges. Squeeze a bit in your palm; it should loosely hold together. If not, repeat rolling and folding. Wrap folded dough in plastic, then press it into a compact disk about 1" thick. Chill 30 minutes.
• Roll out dough on a lightly floured surface to a 12"-14" round or oval about 1/8" thick (don't worry about cracks around perimeter). Dust surface and rolling pin with flour as needed and rotate dough often to prevent wider cracks. If dough sticks to surface, lift on one side and scatter flour underneath before continuing. Roll dough onto your pin, then unfurl it on a sheet of parchment paper. Slide onto a rimmed baking sheet and chill while you prep the filling.
• Do Ahead: Dough can be made 3 days ahead. Keep chilled, or transfer to a resealable plastic bag and freeze up to 3 months. Thaw overnight in the refrigerator before rolling out.

Steps:

• In a small bowl, mix together salt and water. Keep very cold until ready to use.
• Place flour and butter in the bowl of a food processor. Pulse briefly until mixture forms large crumbs. Add the salt water mixture and continue pulsing until a dough has just formed but is not smooth.
• On a lightly floured work surface, evenly divide dough. Form each piece of dough into a disk about 1 inch thick. Wrap each disk with plastic wrap and chill at least 2 hours and up to overnight.

Steps:

• To mix the dough by hand, combine flour, salt and baking powder in a medium sized mixing bowl and stir well to mix. Cut butter into 1tablespoon pieces and add to dry ingredients. Toss once or twice to coat pieces of butter. Then using your hands or a pastry blender, break the butter into tiny pieces and pinch and squeeze it into the dry ingredients. Keep the mixture uniform by occasionally reaching down to the bottom of the bowl and mixing all the ingredients evenly together. Continue rubbing the butter into the dry ingredients until the mixture resembles a coarseground cornmeal and no large pieces of butter remain visible.
• Sprinkle the minimum amount of water over the butter and flour mixture and stir gently with a fork the dough should begin holding together. If the mixture still appears dry and crumbly, add the remaining water, 1 teaspoon at a time for the smaller quantity of dough, a tablespoon at a time for the larger quantity, until the dough holds together easily.
• To mix the dough in the food processor, combine flour, salt and baking powder in work bowl fitted with metal blade. Pulse 3 times at 1second intervals to mix. Cut butter into 1 tablespoon pieces and add to work bowl. Process, pulsing repeatedly at 1second intervals, until the mixture is fine and powdery, resembles a coarseground cornmeal and no large pieces of butter remain visible about 15 pulses in all.
• Scatter the minimum amount of water on the butter and flour mixture and pulse 5 or 6 times the dough should begin holding together. If the mixture still appears dry and crumbly, add the remaining water, 1 teaspoon at a time for the smaller quantity of dough,one tablespoon at a time for the larger quantity, until the dough holds together easily.
• Turn the dough out onto a lightly floured surface and form it into a disk (two equal disks for the larger amount of dough). Sandwich the disk(s) of dough between two pieces of plastic wrap and press it into a 6inch circle. Refrigerate the dough until firm, or until you are ready to use it, at least 1 hour.

Steps:

• To mix the dough by hand, combine flour, salt and baking powder in a medium-sized mixing bowl and stir well to mix. Cut butter into 1-tablespoon pieces and add to dry ingredients. Toss once or twice to coat pieces of butter. Then using your hands or a pastry blender, break the butter into tiny pieces and pinch and squeeze it into the dry ingredients. Keep the mixture uniform by occasionally reaching down to the bottom of the bowl and mixing all the ingredients evenly together. Continue rubbing the butter into the dry ingredients until the mixture resembles a coarse-ground cornmeal and no large pieces of butter remain visible.
• Sprinkle the minimum amount of water over the butter and flour mixture and stir gently with a fork -- the dough should begin holding together. If the mixture still appears dry and crumbly, add the remaining water, a tablespoon at a time, until the dough holds together easily.
• To mix the dough in the food processor, combine flour, salt and baking powder in work bowl fitted with metal blade. Pulse 3 times at 1-second intervals to mix. Cut butter into 1-tablespoon pieces and add to work bowl. Process, pulsing repeatedly at 1-second intervals, until the mixture is fine and powdery, resembles a coarse-ground cornmeal and no large pieces of butter remain visible -- about 15 pulses in all.
• Scatter the minimum amount of water on the butter and flour mixture and pulse 5 or 6 times -- the dough should begin holding together. If the mixture still appears dry and crumbly, add the remaining water, a tablespoon at a time, until the dough holds together easily.
• Turn the dough out onto a lightly floured surface and form it into a disk. Wrap and refrigerate the dough until firm, or until you are ready to use it, at least 1 hour, or up to several days

Steps:

• Whisk the flour and salt together in a medium size bowl. With a pastry blender, cut in the cold shortening until the mixture resembles coarse crumbs. Drizzle 2 to 3 tablespoons ice water over flour. Toss mixture with a fork to moisten, adding more water a few drops at a time until the dough comes together.
• Gently gather dough particles together into a ball. Wrap in plastic wrap, and chill for at least 30 minutes before rolling.
• Roll out dough, and put in a pie plate. Fill with desired filling and bake.

Steps:

• In a large bowl, combine flour and salt. Cut in butter until mixture resembles coarse crumbs. Stir in water, a tablespoon at a time, until mixture forms a ball. Wrap in plastic and refrigerate for 4 hours or overnight.
• Roll dough out to fit a 9 inch pie plate. Place crust in pie plate. Press the dough evenly into the bottom and sides of the pie plate.

Steps:

• Combine flour and salt; cut in butter until crumbly. Gradually add ice water, tossing with a fork until dough holds together when pressed., Shape dough into a disk for a single-crust pie; for a double-crust pie, divide dough in 2 with 1 piece slightly larger than the other. Shape into 2 disks. Wrap and refrigerate 1 hour or overnight., On a lightly floured surface, roll 1 disk of dough to a 1/8-in.-thick circle; transfer to a 9-in. pie plate. , For a single-crust pie: Trim crust to 1/2 in. beyond rim of plate; flute edge. Fill or bake according to recipe directions., For a double-crust pie: Add filling to pie. Roll remaining dough to a 1/8-in.-thick circle. Place over filling. Trim, seal and flute edge. Cut slits in top. Bake according to recipe directions.