Jacquess Lollipops Recipes

Steps:

• Lightly spray each mold with vegetable-oil cooking spray. Use your fingers to spread the spray around inside the mold and into all its little crevices. Set the prepared molds aside while you cook the sugar.
• Combine sugar, water, and the corn syrup in a 2-quart heavy-bottom saucepan, and place over medium-high heat. The corn syrup will make the cooked sugar harder and crunchier. It will also help prevent the cooked sugar from melting as quickly. Stir the sugar mixture gently and slowly to ensure that it cooks evenly (if you do not stir it, there will be hot spots where the sugar will cook faster than in the rest of the mixture). Dip a clean pastry brush in cold water, and brush the inside of the pan clean several times as the sugar cooks to prevent the sugar from recrystallizing. Insert a candy thermometer into the mixture, and cook until mixture is 310 degrees to 320 degrees, known as the "hard-crack" stage.
• Remove the pan from the heat, and pour sugar mixture into a heatproof measuring cup with a spout. Add the desired flavoring and food coloring to the hot sugar, and carefully stir it in using a wooden skewer or chopstick. Immediately pour the hot sugar into the molds, filling them to the top. Set the sticks in place by inserting them just far enough to be secure within each mold. Set the molds aside to allow the sugar to cool completely. When cooled, simply pop out the lollipops.

Steps:

• If desired, add nuts to any or all of the chocolates. Pour the chocolate into the molds, filling them to the top. Set the sticks in place by inserting them just far enough to be secure within the mold you are using. Set the molds aside to allow the chocolate to set. When set, simply pop out the lollipops. If you are using molding compound, roll it into a 1/2-inch-thick rectangle on top of a sheet of parchment paper. Using a sharp paring knife, cut out whatever shapes you would like and remove the cutout, leaving the homemade mold. Spray the inside edge of the molding compound with vegetable cooking spray and pour the chocolate into the cut out space. Insert the lollipop sticks and let cool completely before removing the molding compound. When finished, the molding compound can be saved and reused for another day.
• How to Temper Chocolate (From Dessert Circus, Extraordinary Desserts You Can Make At Home by Jacques Torres): Chocolate is tempered so that after it has been melted, it retains its gloss and hardens again without becoming chalky and white (that happens when the molecules of fat separate and form on top of the chocolate). There are a variety of ways to temper. One of the easiest ways to temper chocolate is to chop it into small pieces and then place it in the microwave for 30 seconds at a time on high power until most of the chocolate is melted. Be very careful not to overheat it. (The temperature of dark chocolate should be between 88 and 90 degrees F, slightly warmer than your bottom lip. It will retain its shape even when mostly melted. White and milk chocolates melt at a temperature approximately 2 degrees F less because of the amount of lactose they contain.) Any remaining lumps will melt in the chocolate's residual heat. Use an immersion blender or whisk to break up the lumps. Usually, chocolate begins to set, or crystallize, along the side of the bowl. As it sets, mix those crystals into the melted chocolate to temper it. A glass bowl retains heat well and keeps the chocolate tempered longer. Another way to temper chocolate is called seeding. In this method, add small pieces of unmelted chocolate to melted chocolate. The amount of unmelted chocolate to be added depends on the temperature of the melted chocolate, but is usually 1/4 of the total amount. It is easiest to use an immersion blender for this, or a whisk. The classic way to temper chocolate is called tabliering. Two thirds of the melted chocolate is poured onto a marble or another cold work surface. The chocolate is spread out and worked with a spatula until its temperature is approximately 81 degrees F. At this stage, it is thick and begins to set. This tempered chocolate is then added to the remaining non-tempered chocolate and mixed thoroughly until the mass has a completely uniform temperature. If the temperature is still too high, part of the chocolate is worked further on the cold surface until the correct temperature is reached. This is a lot of work, requires a lot of room, and makes a big mess. A simple method of checking tempering, is to apply a small quantity of chocolate to a piece of paper or to the point of a knife. If the chocolate has been correctly tempered, it will harden evenly and show a good gloss within a few minutes.

Steps:

• Place lollipop sticks in hard candy molds or arrange sticks 3 in. apart on greased foil-lined baking sheets; set aside., In a heavy saucepan, combine corn syrup and sugar. Bring to a boil over medium heat, stirring occasionally. Cover and cook for 3 minutes to dissolve sugar crystals. Uncover and cook over medium-high heat, without stirring, until a candy thermometer reads 300° (hard-crack stage). , Remove from the heat; stir in flavoring and food coloring, keeping face away from mixture as odor is very strong. Immediately pour into prepared molds or pour free-form over ends of lollipop sticks on baking sheets. Let cool before removing.

Steps:

• Before you begin this recipe, please take a class from a professional on working with sugar. This is a skill that professional pastry chefs develop after years of experience. Working with sugar will burn your fingers so know before you start that your fingers will develop burn blisters. Place the sugar, vinegar and water in a saucepan over high heat. Insert a candy thermometer and cook until the sugar reaches 320 degrees F. Use a pastry brush to keep the inside of the saucepan clean as the sugar cooks or the sugar may recrystallize. To do this, dip a clean brush in cold water and brush the inside of the pan clean. Pour the cooked sugar onto 3 or 4 silicone baking mats. If you want to color and/or flavor the sugar with food colors and/or flavored oils, this is the time to do so. Add a few drops of color to the sugar. Mix with a wooden skewer. To get started, push the sugar from the sides toward the center. This process takes a little while. Try to keep the sugar divided by color. Use the mat to push the firm sugar around the edges toward the center. Use a folding motion to accomplish that task. The next step is to pick up the sugar with your hands. Place each color under the heat of the sugar lamp. Pull the sugar until it becomes glossy and the color is evenly distributed. You will need to pull the colors simultaneously. Keep them under the sugar lamp but keep an eye on them. The lamp can melt the sugar so it is important keep rotating it and folding it onto itself.
• Cut sugar of different flavors. Pull into long ropes. Put together side-to-side. Roll into a big cigar. Pull the sugar to make it a little thinner. When thin, start to roll into a spiral. You can twist the sugar to give it another look. Trim off the end. Insert the stick. Set aside and let it cool. Use any colors, any flavors, and any size. Wrap in plastic and tie with a bow to preserve them.

Steps:

• The mold shapes used were bats, witches, gravestones, ghosts and skulls. You can use any molds to make chocolate lollipops.
• To make the lollipop: Pour any of the tempered chocolates directly into the molds, filling them to the top. Tap the molds against the work surface to release the air bubbles. Set the sticks in place by inserting them just far enough to be secure within the mold you are using. Set the molds aside to allow the chocolate to set. When set, simply pop out the lollipops.
• If you do not have any lollipop molds, you can use Play-Doh modeling clay to make your own molds. Roll fresh Play-Doh into a 1/2-inch-thick rectangle on top of a sheet of parchment paper. Use a sharp paring knife to cut shapes from the Play-Doh. Remove the cutout leaving the homemade mold. Spray the inside edge of the Play-Doh with vegetable cooking spray. Pour the chocolate into the cutout space. Insert the lollipop sticks and let cool completely before removing the Play-Doh. When finished, the Play-Doh can be saved and reused for another day.

Steps:

• Place the sugar, vinegar and water in a saucepan over high heat. Insert a candy thermometer and cook until the sugar reaches 320 degrees F. Use a pastry brush to keep the inside of the saucepan clean as the sugar cooks or the sugar may recrystallize. To do this, dip a clean brush in cold water and brush the inside of the pan clean. Pour the cooked sugar onto 3 or 4 silicone baking mats. If you want to color and/or flavor the sugar with food colors and/or flavored oils, this is the time to do so. Add a few drops of flavor and color to the sugar. Mix with a wooden skewer. To get started, push the sugar from the sides toward the center. This process takes a little while. Try to keep the sugar divided by color. Use the mat to push the firm sugar around the edges toward the center, using a folding motion. When it has just cooled enough to handle, pick up the sugar with your hands. Place each color under the heat of a sugar lamp.
• Pull the sugar until it becomes glossy and the color is evenly distributed. You will need to pull the colors simultaneously. Keep them under the sugar lamp but keep an eye on them. The lamp can melt the sugar so it is important keep rotating it and folding it onto itself.
• Pull a walnut-sized piece from the sugar and form it into a small ball. Use your palm to press the ball flat. Shape it into a circle or oval. Insert the lollipop stick. Set the lollipop on the silicone baking mat (it will stick if you place it directly on your work surface.) Pull and cut small pieces of sugar and form them into the eyes, mouth, nose, eyebrows or whatever feature you desire. Stick the pieces directly onto the lollipop. The sugar will be hot enough to adhere. Enjoy!

Steps:

• Arrange the lollipop sticks in the lollipop molds and place on a baking sheet. Set aside.
• Combine the sugar, water, and cream of tartar in a heavy-bottomed saucepan over medium heat. Stir until the sugar is dissolved. Increase the heat to high and, without stirring, cook until the sugar is amber or until a candy thermometer reads between 300 to 310 degrees F (hard-ball stage), about 10 minutes (see Cook's Note*). Promptly remove the saucepan from the heat. Carefully stir in the flavored extract.
• Work quickly, drop 1 teaspoon of the hot mixture into each lollipop mold. Reheat the mixture briefly over low heat if it starts to thicken. Let the lollipops cool for at least 15 minutes. Remove from molds and store in airtight containers or wrap individually.