Pressure Cooker Barbecued Baby Back Ribs Recipe 445

Steps:

• Rub: Combine the ingredients and rub mixture evenly over the ribs. Sauce: Heat oil in the pressure cooker pot over medium heat until shimmering. Add the onion and cook until softened, about 5 minutes. Stir in garlic and cook until fragrant, about 30 seconds. Stir in ketchup, water, molasses, vinegar and mustard. Stir to combine. Cook for one minute (my additional step) Measure out and reserve one cup of the sauce. Arrange the ribs upright in the pot, with meaty sides facing outward, then pour reserved sauce over the ribs. Lock the pressure cooker lid in place and bring to high pressure over medium-high heat. As soon as the pot reaches high pressure, reduce heat to medium-low and cook for 30 minutes adjusting heat as needed to maintain high pressure. Note: I set my electric pressure cooker to medium-high for 15 minutes, then let it do a natural pressure release for 15 minutes. Our ribs turned out perfectly. For a slow cooker, cook for 6 to 8 hours. Before serving: Preheat the broiler with the rack 6-inch below the flame. Remove ribs (meaty side up), with tongs, onto a foil-lined baking sheet with a baking rack set on top. Skim off the excess fat from the sauce, in the pot. Simmer the sauce until it is thickened, about 10 minutes, to equal about 2 cups. Brush the ribs with some of the sauce, flipping them over and brushing both sides. Starting with the meaty side up, broil until browned and sticky, for 2 to 3 minutes per side. Watch closely, as the sauce has sugar and can burn! Turn over a few times, adding additional sauce-- for a total of 10 to 15 minutes. Yum!

Steps:

• Combine kosher salt, brown sugar, chili powder, paprika, garlic powder, cayenne pepper, and black pepper in a small bowl for the spice rub.
• Cut the rack of ribs into 4 equal portions. Rub all sides of each piece with spice rub.
• Pour broth into a multi-functional pressure cooker (such as Instant Pot®). Add ribs in a teepee formation. Close and lock the lid. Select high pressure according to manufacturer's instructions; set timer for 30 minutes. Allow 10 to 15 minutes for pressure to build.
• Preheat the oven to 425 degrees F (220 degrees C). Line a baking sheet with aluminum foil.
• Release pressure carefully using the quick-release method according to manufacturer's instructions, about 5 minutes. Unlock and remove lid. Move ribs to the baking sheet using tongs. Brush ribs on all sides with barbeque sauce.
• Bake in the preheated oven for 7 minutes. Turn ribs and continue baking until meat pulls away easily from the bone, about 7 minutes more. An instant-read thermometer inserted into the center should read 145 degrees F (63 degrees C).

Steps:

• Place the metal rack in your cooker and add 1/2 cup of water (I used 1 cup as the manufacturer of my electric cooker recommends).
• If your cooker is large enough you can bend the racks around in a circle. Otherwise cut into sections and stand them upright in the cooker.
• Lock the lid in place.
• Bring to 15psi (high pressure in electric cooker) and cook for 12 minutes.
• Remove from heat and use quick release method to depressurize.
• When pressure drops, carefully open lid and use long tongs to remove ribs.
• Cover with sauce by dipping in sauce in a shallow pan, or basting well as you broil or BBQ the ribs to complete.

Steps:

• Select saute or browning setting on a 6-qt. electric pressure cooker and adjust for medium heat; add oil. Brown ribs in batches, adding additional oil as needed. Remove ribs. Brown onions. Add ribs back to the pressure cooker. Add water. Lock lid; close pressure-release valve. Adjust to pressure-cook on high for 40 minutes. Let pressure release naturally for 10 minutes and then quick-release any remaining pressure., In a small saucepan, combine the remaining ingredients; cook and stir over medium heat until heated through. Remove ribs from pressure cooker; discard cooking juices. Return ribs to pressure cooker. Pour sauce over top. Lock lid; close pressure-release valve. Adjust to pressure-cook on low for 5 minutes. Allow pressure to naturally release for 5 minutes and then quick-release any remaining pressure. Serve ribs with sauce.

Steps:

• Pour apple cider into an 8-quart multi-functional electric pressure cooker (such as Instant Pot®) to about 1/2 inch below the rack line. Stir in garlic powder, salt, paprika, and pepper. Place rack inside and heat the liquid completely; place ribs on rack.
• Close and lock the lid. Select high pressure according to manufacturer's instructions; set timer for 27 minutes. Allow 10 to 15 minutes for pressure to build.
• Preheat the oven to 350 degrees F (175 degrees C). Line a baking pan with a roasting rack.
• Pour about 2 cups BBQ sauce into a large cup. Add garlic, brown sugar, and chili sauce. Mix with a hand blender until completely smooth. Combine with the remaining BBQ sauce in a large bowl. Set aside to come to room temperature.
• Release pressure carefully using the quick-release method according to manufacturer's instructions, about 5 minutes.
• Remove ribs carefully and drain cooking liquid. Fully submerge each rib into the BBQ sauce. Place on the roasting rack so they are not touching. Brush extra BBQ sauce on top to make them extra sticky.
• Bake in the preheated oven until sauce is set, 15 to 20 minutes.