Zucchini Bread Bread Machine Recipes

Steps:

• Add all ingredients in the pan according to the order in manufacturer's directions.
• Set crust on medium and program for the Basic cycle; press Start.
• When the baking cycle ends, immediately remove the bread from pan and place on a rack.
• Let cool to room temperature before slicing.

Steps:

• Place ingredients in order shown in bread pan and select Quick Bread/Cake cycle. Select 1 1/2 lb loaf size. Press Start.
• After 4 minutes, scrape down the sides and bottom of the bread pan with a rubber spatula. Allow cycle to continue.
• When baking is completed, remove and turn out onto wire racki to cool.
• Wrap in plastic wrap after completely cooled.
• Note: Baking powder and baking soda lose their power faster than you realize. Unless your packages are new, test before using. To test baking soda, put a few tablespoons of white vinegar into a small bowl and add a teaspoon of baking soda. It should bubble up furiously, and the foaming should take several moments to subside. The more bubbles, the more potent the baking soda. If there is no reaction, or you only end up with a handful of small bubbles, you need to replace your baking soda.To test baking powder, baking powder, pour a teaspoonful of baking powder into a bowl or small glass.Fill the bowl with hot water to cover the baking powder (about 1/4 cup should do it).If the baking powder begins to bubble furiously, it's fine to use in your recipes.Tip: For best results, do not dip a wet spoon into the can of baking powder when measuring what you need. The moisture will activate the baking powder left behind in the can and it won't be as good to use next time. If you see lumps in your baking powder, that's usually a sign moisture has found its way inches.

Steps:

• Add all ingredients to bread pan in order given.
• This recipe was created using the Whole wheat setting.

Steps:

• Place room temperature ingredients in pan in order listed. Select Basic or White Bread cycle with medium/normal crust. Check dough consistency after 5 minutes of kneading. If it is a dry and stiff ball, add liquid, 1/2 to 1 tablespoon at a time; if too wet and sticky, add 1 tablespoon of flour at a time. Remove bread when cycle is finished; cool.

Steps:

• Place all ingredients in bread pan, select Light Crust setting, and press Start.
• After the baking cycle ends, remove bread from pan, place on cake rack, and allow to cool for 1 hour before slicing. (Remember to remove kneading paddle, if necessary.).

Steps:

• Coat the inside of the bread pan fitted with the kneading paddle with nonstick cooking spray. Place all ingredients, in order listed, in the bread pan and secure the pan in the Automatic Bread maker. Press menu button to select the Cake/Quick Bread program. Press Start/Stop to mix and bake. While the batter is mixing, scrape the sides of the bread pan with a rubber spatula to fully incorporate ingredients. When cycle is complete, remove from bread pan and place on wire rack to cool completely for best slicing results.