World Championship Baby Back Ribs Recipes

Steps:

• For the rub: The day before cooking, mix the turbinado sugar, salt, paprika, chili powder, granulated garlic, onion powder, ground cumin, ground mustard, cayenne pepper and black pepper together.
• For the ribs: Take a slab of ribs and turn over so the curved side is up. Using your fingernail or a knife, pry under the membrane until you can put your finger under it and then pull it off.
• Sprinkle this side of the ribs with about 1 tablespoon rub, and then about 1 tablespoon yellow mustard. Use the mustard to help evenly distribute the seasoning. Turn the ribs over and repeat the process. Cover and store in the refrigerator overnight.
• To cook, start a smoker and bring the temp to 200 degrees F. Use apple or cherry wood chunks to provide smoke and flavor. Place the ribs in the smoker, curved side down. Smoke for 2 hours at 200 degrees F, and then raise the temperature to 250 degrees F for about 2 1/2 hours. Check for tenderness by testing if the bones will pull apart with a slight bit of pressure. If they are still tough, allow to cook for another 30 minutes.
• Remove from the smoker. For dry-style ribs, sprinkle with about 1 tablespoon rub. For wet-style ribs, glaze with the BBQ sauce.

Steps:

• Prepare your cooker to cook indirectly at 235 degrees F using medium pecan wood for smoke flavor.
• Peel the membrane off the back of the ribs and trim any excess fat. Season the ribs liberally on both sides with the barbecue rub. Place the ribs in the smoker, meat-side up, and cook for 2 hours. Flip the ribs and cook for 45 minutes.
• Lay out two double-thick sheets of heavy-duty aluminum foil. Lay one slab on each piece of foil, meat-side up. Top each slab with half of the brown sugar. Drizzle each slab with half of the honey, butter, and Tiger Sauce. Close up the rib packages, pressing out as much air as possible. Do not seal the packages tightly; they need to breathe a little.
• Return to the cooker for 30 minutes. Open the packages and check for doneness by pushing a toothpick into the meat. It should go in and out very easily. If you want the ribs more tender, just wrap them back up and cook a little longer. When they're as you like them, transfer to a sheet pan. Remove the foil and return the ribs to the cooker meat-side down. Brush the bone side liberally with barbecue sauce and cook for 10 minutes. Flip the ribs and brush the meat side liberally with barbecue sauce. Cook for 20 minutes. Transfer to a cutting board and tent loosely with foil. Let rest for 5 minutes. Slice each rib individually and transfer to a platter to serve.
• This rub is extra-sweet and goes really well with ribs and other cuts of pork. It is a good choice if you like to serve your ribs dry. The sweetness will have the guests thinking you used barbecue sauce. This one isn't recommended for hot grilling because all that sugar makes it burn pretty easily. I like to mix it in the food processor for a finer grind, but if you like it coarse just mix it in a bowl.
• Combine all the ingredients in the bowl of a food processor with a metal blade. Process for 5 seconds, until the lumps are gone. The rub may be stored in an airtight container in a cool place for up to 6 months.
• This is a big, thick, red barbecue sauce made with fresh ingredients and a lot of love in your kitchen. Every barbecue cook I have ever known has a mother sauce they've been working on for years and this would be a great place to start on yours. You can skip the liquid smoke if you like, but I think it adds a nice layer to barbecue sauce.
• In a medium saucepan over medium heat, melt the butter. Add the onion, garlic, and jalapeno and cook for about 8 minutes, stirring occasionally, until soft. Add the celery seed and mix well. Cook for 1 minute. Add the ketchup, vinegar, honey, mustard, apple juice, soy sauce, Worcestershire, hot sauce, tomato paste, liquid smoke (if using), salt, and pepper. Mix well and bring to a simmer. Cook for 20 minutes, mixing often, until thickened. Remove from the heat and serve or cool and store the sauce in an airtight container in the refrigerator for up to 1 week.

Steps:

• Lay the ribs in a non-reactive pan and brush on both sides with the vinegar water mixture. Sprinkle with seasoning mix and rub with your fingertips, massaging it into the meat. Cover and refrigerate for at least 12 hours.
• Start the grill, allowing it to reach a temperature of 250-degrees. Put the slabs in the grill. (If the grill is fitted with a rotisserie or carousel, attach the slabs to the apparatus.) Cook for 4 1/2 to 5 1/2 hours, turning the meat every 15 minutes (unless it is attached to a rotating apparatus). The ribs are done when the internal temperature of the meat reaches 180 degrees, when the ribs are flexible, when the meat is fork-tender, and when the ends of the bone extend about 3/8-inch below the meat.
• To serve, cut the slabs into individual bones or 3, 4, or 6-rib racks. Serve immediately with or without your favorite sauce.

Steps:

• Preheat a gas grill for high heat, or arrange charcoal briquettes on one side of the barbeque. Lightly oil the grate.
• In a small jar, combine cumin, chili powder, paprika, salt, and pepper. Close the lid, and shake to mix.
• Trim the membrane sheath from the back of each rack. Run a small, sharp knife between the membrane and each rib, and snip off the membrane as much as possible. Sprinkle as much of the rub onto both sides of the ribs as desired. To prevent the ribs from becoming too dark and spicy, do not thoroughly rub the spices into the ribs. Store the unused portion of the spice mix for future use.
• Place aluminum foil on lower rack to capture drippings and prevent flare-ups. Lay the ribs on the top rack of the grill (away from the coals, if you're using briquettes). Reduce gas heat to low, close lid, and leave undisturbed for 1 hour. Do not lift the lid at all.
• Brush ribs with barbecue sauce, and grill an additional 5 minutes. Serve ribs as whole rack, or cut between each rib bone and pile individually on a platter.